Splash Pad Construction
Planning, Design, and Layout
We utilize our experience building complex pools, spas, and landscapes to create incredible splash pads. The first step to a splash pad install is to design the water feature to fit the area and include all the features a client desires. This is the time we do all the construction planning and acquire any city permits necessary. We then layout the splash pad in the backyard based on the design plan.
Plumbing
Residential splash pads use recirculated water stored which is stored in an underground reservoir that has been filtered and sanitized. All the sch 40 piping is sized based on your unique splash pad installation. Since every splash pad is a custom installation, we tailor the plumbing and equipment to match your exact project. The heart of the splash pad is the equipment. We use the highest grade equipment designed for swimming pools and spas which perform at optimum levels.
Water chemistry is an important part of the system. Chlorinators are usually installed as a primary sanitizer. Secondary water sanitizers can be added. We recommend having a UV water sanitizer as well as an ozone cleaning system.
Equipment
We install Pentair variable speed and variable flow pool pumps to have ultimate control in our custom splash pads. A cartridge filter serves as the primary cleaning unit to remove particulates from the water. We combine multiple valves to control the water flow to each feature or nozzle. An automatic water leveler keeps the water reservoir tank full.
Electrical
There isn’t a high demand for power to run a splash pad so they are very efficient and not expensive to operate. We utilize variable speed pumps to give the owner maximum control. There is no high voltage power at the feature itself so they are safe to operate.
Concrete
Every splash pad we build uses high strength steel reinforced concrete to resist cracking. Everything must be sloped correctly to ensure proper flow and operation without puddling or standing water to minimize run off.
Surfacing
PIP rubber is an option that is troweled onto the concrete sub-base.
Acrylic lace is the most popular option for splash pads in AZ. We use a spray on process similar to pool decking. We use a specially formulated product that resists water and moisture.
Nozzle and Water Feature Installation
The last phase brings the splash pad to life. After flushing the entire plumbing system, we install the various nozzles chosen by the client. We also install the above ground water features. After everything has been installed, we thoroughly test the system and operate all the water features to ensure your new splash pad is operating optimally. Then it is time to enjoy your water park in your own backyard!
Splash Pad Options
Surfacing
PIP rubber is a surface option that has a cushion effect to help protect from falls. Poured in place rubber surfacing comes in a variety of colors which can be combined to create vibrant patterns.
Acrylic lace is the most popular option for splash pads in Arizona. It is a low-cost alternative to PIP rubber and still offers a multitude of colors. Often times 2 or more colors are combined to create a splash park effect.
Pavers, flagstone, colored concrete, and exposed aggregate are all possible choices for splash pads.
Above Ground Water Features
With numerous choices available, combinations and colors are endless. From mushrooms and umbrellas to fire hydrants and cannons, there is something to please everybody. We also can custom design water features for specialty projects.
Nozzles
They are available in plastic or stainless steel with high flow and low flow options. Different combinations of spray nozzles can be used within the same splash pad.
Automation
Splash Pads can operate on automation just like your pool and spa. We can install wall mounted switches, activator posts, wireless remotes or phone app automation to control your backyard splash pad.
Sanitizers
Chlorinators are generally the primary sanitizer used for splash pad installations in Phoenix, but secondary sanitizers are a popular option to optimize the health of the water. A UV sanitizer neutralizes bacteria and pathogens that could be present in the water while reducing chlorine use. An ozone oxidation system eliminates contaminants like chloramines that causes odors while also reducing chlorine usage.
How much is a Splash Pad in Scottsdale or Phoenix, AZ?
A splash pad installation cost in AZ is comparable to the cost of an above ground spa or hot tub. Just like a swimming pool or spa, there are many options that have varying costs. Basic to mid-level splash pads usually range between $8000-$12,000. Larger backyard splash pads normally are $12,000-$20,000 or higher.
Nozzles are an inexpensive way to add excitement to a splash pad. Depending on the size and type of nozzle, they can be as low as $100 each.
Above ground water features offer a dramatic appearance as well as unlimited fun. Most features range from $1,000-$5,000. Commercial grade and custom features can be $5,000-$10,000 and above.
Secondary sanitizers are an inexpensive way to ensure healthy and clean water. UV systems and Ozone cleaning systems can be added for about $800-$2000 depending on the system.
Automation is a very popular option for pools, spas, and splash pads. Adding a splash pad to an existing automation system can be as little as $500. If it is a stand alone system without a pool, we have options for a complete automation system to control your backyard splash pad.
As a licensed AZ pool and landscaping company we have the knowledge and experience to design and build a splash pad for your backyard landscape.
Splash Pad FAQs
They use a holding tank that recirculates the water after cleaning and sanitizing it. There is very little evaporation since the water is stored underground.
We have a 3 year warranty on all splash pads and equipment. With proper care and maintenance your splash pad will far exceed that time frame.
Yes, but we would recommend doing this at the time of a pool remodel since we would need to add plumbing to the pool.
An experienced splash pad builder can complete the process in as little as a week depending on size and complexity.
There is no given size or shape a splash pad needs to be, but as a splash pad contractor, we recommend an area at least 10’x10′.
Building a splash pad may require a permit depending on the existing conditions, complexity, and electrical needed. Phoenix, Scottsdale, Paradise Valley and other jurisdictions all have varying requirements when it comes to pool, spa, and splash pad installation.
